White 1/4" PE Hose 0.8mm 60W Self-Priming Pump Garden Misting Watering

Feature:

- It is recommended to install the atomization system at a height of 2.5m- .

- Connect the adapter to the faucet.

- Screw the spray nozzle onto the tee fitting, except for the last nozzle.

- Turn on the tap to clean the system for 2 minutes to ensure that the system is completely cleaned.

- Turn off the water and install the last nozzle on the connector and use the end plug.

- The fine atomizing nozzle uses a brass main body with a stainless steel core guide vane embedded inside. The liquid forms a centrifugal vortex in the guide vane and sprays fine hollow fog particles from the spray hole. It can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog. The spray hole of this kind of nozzle is drilled by the American precision drilling machine, with a hole diameter of 0.8mm, which is well made, and the use cost is saved compared with gas humidification

- This series of nozzles do not need air assistance, the system device is simple, the spray point is fine, the atomization is sufficient, energy and water conservation, low cost, good effect; The stainless steel spray sheet is treated by advanced forging process and has strong durability. It is the same kind of nozzle

- This nozzle can make full use of the pressure of tap water for atomization, and the effect is better when using high-pressure water pump.

Specifications:

- Misting Cooling Watering Kit

- Material: Plastic

- Pressure:5bar~20bar

Overview:

100% brand new and high quality;

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures. Thank you!
2. Please forgive 1-3mm measuring deviation due to manual measurement.